Samsung RSH1FLMR1/ZAM, RSH1FTSW1/XEF, RSH1NTSW1/ZAM Replacement Instructions, For Exterior model

Models: RSH3FTPE1/JUM RSH1FTBP1/FAL RSH1NBSW1/TAC RSH1FERS1/TAC RSH1FTPE1/XET RSH1FTSW1/ZAM RSH1FTPE1/FAL RSH3FTPE1/MTR RSH1NTSW1/ZAM RSH1FTSW1/XEF RSH1FTSW1/FAL RSH1FLMR1/CHA RSH3NTSW1/ZAM RSH1FLMR1/TAC RSH1FTEW1/JUM RSH1FLMR1/ZAM

1 42
Download 42 pages 27.85 Kb
Page 20
Image 20

instaLLing tHE watEr DisPEnsEr LinE

For Exterior model

Parts for water line Installation

Water line fixer and

Pipe

Water line

Purifier lock-clip

 

 

 

screws

connector

 

Purifier

Connecting to the water supply line

Connect the water pipe with coupler and tap.

1.Close the main water tap.

2.Connect coupler “A” to the tap.

WARRANTY INFORMATION

This water line installation is not covered by the refrigerator or ice maker manufacturer’s warranty. Follow these instructions carefully to minimise the risk of expensive water damage.

Note:

If the coupler does not fit on the current tap, go

the nearest authorised service dealer and purchase the right couplers fittings.

CAUTION

The water line must be connected to the cold water pipe. If it is connected to the hot water pipe, it may cause the purifier to malfunction.

COUPLER “A”

TAP

LINE OUTLET

select the location where the purifier is to install. (Model with the purifier)

-If you wish to reassemble the water inlet and outlet sides of the purifier during purifier installation, see the reference illustration.

-Cut the water line attached to the purifier to the appropriate place after measuring the distance between the purifier and the cold water tap.

Replacement Instructions

SIDE OF

90 degree

PURIFIER

 

CAUTION

 

 

PURIFIER WATER

Insert Locking Clip After

tube seated

 

 

WATER INLET

COUPLER

Locking Clip

SIDE OF PURIFIER

 

 

 

 

FLOW DIRECTION

1.

Shut off water supply.

WATER SUPPLY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Note the Flow direction on the filter.

INLET SIDE

 

 

 

 

 

 

3.

Insert water supply tube into the inlet side of the filter until the tube stop.

PERMEAT

Note : You must also ensure that the cut is square and not at any sort of angle as this could cause a leak

4.After inserting tube, put together the clip strongly. The Clip fix the tube.

5.Turn on the water and check for leaks. If leaks occur, repeat step 1,2,3,4. If leaks persist, discontinue use and call your supporting dealer.

6.Flush filter for 5 minutes before use.

20_ setting up

Page 20
Image 20
Samsung RSH1FLMR1/ZAM, RSH1FTSW1/XEF, RSH1NTSW1/ZAM, RSH1FTPE1/FAL manual Replacement Instructions, For Exterior model