Samsung RSH1FTPE1/XET Connecting the water line to the refrigerator, Installing the water filter

Models: RSH3FTPE1/JUM RSH1FTBP1/FAL RSH1NBSW1/TAC RSH1FERS1/TAC RSH1FTPE1/XET RSH1FTSW1/ZAM RSH1FTPE1/FAL RSH3FTPE1/MTR RSH1NTSW1/ZAM RSH1FTSW1/XEF RSH1FTSW1/FAL RSH1FLMR1/CHA RSH3NTSW1/ZAM RSH1FLMR1/TAC RSH1FTEW1/JUM RSH1FLMR1/ZAM

1 42
Download 42 pages 27.85 Kb
Page 19
Image 19

setting up your side-by-side refrigerator

Connecting the water line to the refrigerator

1.Remove the cap from water line on the unit and insert compression nut to the water line on the unit after disassembling from provided water line.

2.Connect both water line from the unit and water line provided kit.

3.Tighten the compression nut onto the compression fitting. Be careful no gap between two items.

4.Turn water on and check for any leakage.

PU ESTTING01

Loosen a

Remove

cap

Water Line

from unit

Water Line

from Kit

No gap

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure you get a snug, leak-free connection.

CAUTION

Before being used, the leakage in these places should be examined

• Samsung Warranty does not cover

WATER LINE INSTALLATION.

• It’ll be done at customer’s charge except the retail price includes installation cost.

• Please contact Plumber or Authorized Installer for the installation if needed.

• If Water leakage happened due to improper installation, Please contact installer.

Installing the water filter.

1.Remove the water filter from the box and put a replacement indicator sticker on the filter as shown.

2.Place a sticker on the filter that dates six months in the future. For example, if you install the water filter in March, put the “SEP” sticker on the filter to remind you to replace in September. That way you’ll know when it is time to replace the filter. Normally filter life is about 6 months.

3.Next, remove the fixed cap by turning it counter clockwise. Keep the cap in a safe place for use if you choose not to use a filter.

4.Remove the filter’s protective cap and then

position and insert the filter into the filter housing.

5. Slowly turn the water filter clockwise 90º to align with the indication mark on the cover, locking the filter in position. Make sure that the indicator is lined up with the “lock” position. Remember, do not over-tighten.

Separation

If your model contains wine shelf, you should of red cap remove the wine shelf before installing water

filters.

1 2

3

Sticker

(Month indication)

Cover filter

Align the indication mark with lock position

setting up _19

Page 19
Image 19
Samsung RSH1FTPE1/XET, RSH1FTSW1/XEF manual Connecting the water line to the refrigerator, Installing the water filter