When installing, servicing, or cleaning behind the refrigerator, be sure to CAUTION pull the unit straight out and push back in straight after finishing.
Also, make sure your floor supports the
•Please tie up the extra length of the power CAUTION cord at the back of the refrigerator so as not
to be touched on the floor preventing the power cord from being crushed by the rollers upon relocation.
LEVELing THE rEfrigErATor
If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.
case 1) The appliance tilts down to the left.
•Turn the left adjusting leg in the direction of the arrow until the appliance is level.
case 2) The appliance tilts down to the right.
•Turn the right adjusting leg in the direction of the arrow until the appliance is level.
Pu ing sETT 01
| Leg | Leg |
screw Driver | <case 1> |
|
|
|
<case 2> screw Driver
insTALLing AnD DisAssEMBLing THE Door HAnDLE
Installing the Door Handle
1.Match the Handle Locking Tabs installed on the left hand side of the door and the handle inserts.
2.Fix the handle by pulling it down or tapping it lightly with a tool like a rubber hammer.
3.Check whether the locking tabs inside the handle are assembled by pulling it up and down.
setting up _7
2011.6.8 1:54:55 | PM | |
|
|
|
