Samsung recommends that reversing of the WARNING door opening is only completed by Samsung
approved Service providers. This will be on a chargeable basis and at the customers expense.
Any damage caused while attempting to reverse the door opening is not covered under the appliance manufactures warranty. Any repairs requested due to this circumstance will be completed on a chargeable basis at the customers expense.
Required Tools (Not provided)
1.Remove 4 screws on the top of the freezer.
2.Remove the plastic cover and make sure to disconnect the wire connected to it.
After removing the plastic cover, check the parts for reversing the door.
Phillips Head | Flat Head | 10 mm | |
Socket Wrench | |||
Driver (+) | Driver | ||
(for bolts) | |||
|
|
Be careful not to damage the electrical wires CAUTION when removing the plastic cover.
3.Disconnect the wires and then remove 3 bolts.
8 mm
5 mm Hex
Spanner Wrench
Socket Wrench (for hinge shaft) (for bottom (for bolts)
hinge shaft)
Make sure your freezer is unplugged before
WARNING handling electrical wires.
English - 12