10.Remove the wire cover on top of the freezer door to switch the side of the wires.
13.Reassemble the hinge on the freezer door by reversing the step 11. Make sure to use right side hinge cover (which can be found underneath the removed plastic cover from step 2) and remove the grommet. After reassembling the hinge, wire and the hinge cover, switch the side from left to the right.
Grommet 
11.Remove the hinge and the grommet from the freezer door. Detach the left side hinge cover and pull the wires out of the hinge cover.
Hinge cover
Grommet
Be careful not to damage the electrical wires CAUTION when removing the hinge cover.
14.After switching the hinge, make sure to take out Cover Wire Door R in the packing and close it with the wire cover on the top of freezer door.
“Cover Wire Door R” can be found in the packaging
12.Use wrench to separate the hinge shaft and then flip the hinge and reattach the hinge shaft.And remove the shim at the top and attach it to the other side.
15.Take off the handle cover and remove the screws, make sure to detach the caps and the handle from the right to left side of the door. (Make sure to cover the right side with detached caps.)
Handles may not have cover depending on the models.
English - 14