Ice tray may look different depending on models.
Making ice cubes
1.Remove the ice cube tray by pulling it towards you.
2.Fill the tray with water up to the maximum water level marked on the tray.
3.Slide the tray back into the holder, taking care not to spill the water.
4.Wait until the ice cubes are formed.
Some of the features can be different and may not be available depending on the model.
Top shelf cover
1.Push the right side of cover inward until you can get the projection on the left side out.
2.When both sides of the projections are out of the grooves, pull it towards you to remove the cover.
water level
Freezing time
It is recommended that you wait for about one hour with the temperature set to Power Freeze for the ice cubes to form.
Removing the ice cubes
1.Make sure that the ice bin is in place under the ice tray. If not, slide it into place.
2.Twist the handle of ice tray firmly in the clockwise direction until the tray twists slightly. The ice cubes fall into the storage bin.
3.To get ice, slightly lift up the ice tray and pull it towards you.
Make sure that you remove the top shelf cover when you assemble or disassemble the glass shelf.
Twist ice maker (Optional)
Slightly lift up the twist ice maker and pull it towards you.
Boxes
Pull the boxes out fully then slightly lift it up to remove the boxes. (Small box/Fresher box/Big box)
English - 20