2.Remove the plastic cover and make sure to disconnect the wire connected to it.
After removing the plastic cover, check the parts for reversing the door.
Be careful not to damage the electrical wires CAUTION when removing the plastic cover.
3.Disconnect the wires and then remove 3 bolts.
Make sure your freezer is unplugged before WARNING handling electrical wires.
4.Remove the door from the lower hinge by carefully lifting the door straight up.
Freezer door is heavy, be careful not to injure CAUTION yourself when removing the freezer door.
5.Separate the front leg cover after removing 2 screws.
Screws
6.Unscrew 3 bolts tightening the hinge and also unscrew 3 bolts on the bottom right side by the front leg where removed hinge will be attached.
10mm
10mm
7.Separate the hinge shaft by using hex wrench fi rst. Unscrew the bolt to remove the hinge riser and switch the side of the hinge shaft and the hinge riser.
Hinge shaft 
8mm Bolt
Hinge riser 
8. Attach the hinge on the bottom right side of the | 01 | |
freezer where bolts were previously removed in | ||
SETTINGUP | ||
step 6. Screw the bolts that were removed on | ||
| ||
the bottom left side of the freezer for the future |
| |
usage. |
| |
10mm |
| |
10mm |
|
9.Remove the screws on the bottom right and left side of the freezer door. Switch the side of the door stopper from left to the right. Hinge riser should be switched as well.
| Hinge riser | Hinge riser | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10.Remove the wire cover on top of the freezer door to switch the side of the wires.
11.Remove the hinge and the grommet from the freezer door. Detach the left side hinge cover and pull the wires out of the hinge cover.
Hinge cover
Grommet
Be careful not to damage the electrical wires CAUTION when removing the hinge cover.
