Brother 882-S90/S91 manual 148, When Threading Manually

SEWING AN EMBROIDERY PATTERN

■When Threading Manually

aThread the machine manually with the first color (see “Threading Manually” on page 27).

bLower the presser foot, then press the “Start/Stop” button to start embroidering. After 5-6 stitches, press the “Start/Stop” button again to stop the machine.

cTrim the excess thread at the end of the seam. If the end of the seam is under the presser foot, raise the presser foot, then trim the excess thread.

Memo

If there is thread left over from the beginning of sewing, it may be sewn over as you con- tinue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the threads at the beginning.

dPress the “Start/Stop” button again to restart the machine.

eRepeatsection.steps c and d from the previous

Sewing Embroidery Patterns Which Use Appliqué

There are some patterns which call for an appliqué inside the pattern.

When sewing an embroidery pattern with an appliqué, the color sewing order display shows “Appliqué Material”, “Appliqué Position”, “Appliqué”, and then the sewing order of the colors around the appliqué.

Memo

Depending on the thread color display setting,

the display may show ,

, or .

aAttach an iron-on stabilizer to the wrong side of the appliqué material.

a

b

aAppliqué material (cotton, felt, etc.)

bIron-on stabilizer

bPlace the appliqué material into the embroidery frame, and then press the “Start/Stop” button to sew the outline of the appliqué.

a

b

aOutline of appliqué

bAppliqué material

Memo

The embroidery procedure is the same as the basic procedure explained on pages 147 through 148.

→The machine will sew around the outline of the appliqué pieces and will then stop.

148