Brother 882-S90/S91 manual Upper Threading, Threading Using the Automatic Threading Button

UPPER THREADING

UPPER THREADING

Threading Using the “Automatic Threading” Button

Press → → →

in that order to display a video example of

the operation on the LCD (see page 18). Follow the steps explained below to complete the operation.

CAUTION

•Be sure to thread the machine properly. Improper threading can cause the thread to tangle and break the needle, leading to injury.

•When using accessories not included with this machine, attach the accessory to the machine after threading the machine.

Memo

•The automatic threading function can be used with sewing machine needles 75/11 through 100/16.

•Thread such as transparent nylon monofila- ment thread and thread with a thickness of 130/20 or thicker cannot be used with the automatic threading function.

•The automatic threading function cannot be used with the wing needle or the twin nee- dle.

•If the automatic threading function cannot be used, see “Threading Manually” on page 27.

7

6

5 3, 4

2 8

1

aTurn the main power to ON.

bPress the “Needle Position” button to raise the needle.

Note

If you try to thread the needle automatically without raising the needle, the thread may not thread correctly.

cPivot the spool pin so that it angles upward. Set the thread spool on the spool pin so that the thread unwinds from the front of the spool.

a

b

c

aSpool pin

bSpool cap

cThread spool

dPush the spool cap onto the spool pin as far as possible, then return the spool pin to its original position.

CAUTION

•If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin and cause the needle to break.

•Use the spool cap (large, medium, or small) that is closest in size to the thread spool. If a spool cap smaller than the thread spool is used, the thread may become caught in the slit on the end of the spool and cause the needle to break.

1

Getting Ready

25