Brother 882-S90/S91 manual 149, Press the Start/Stop button

SEWING AN EMBROIDERY PATTERN

cRemove the appliqué material from the embroidery frame, and then cut carefully along the stitching. After cutting, remove all of the stitching thread carefully.

*Carefully cut out the pattern on the outline you just sewed. Do not cut inside the stitching line, as the appliqué fabric will not be caught by the appliqué stitch.

dPlaceframe.the base material into the embroidery

a

aBase material

ePress the “Start/Stop” button to sew the position of the appliqué.

*Use the same thread color you plan to use when attaching the appliqué in step g.

a

b

aPosition of appliqué

bBase material

→The machine will sew around the position of the appliqué and will then stop.

fApply a thin layer of adhesive or spray adhesive to the back of the appliqué piece and attach it to the appliqué position so that it follows the seam of the outline.

Memo

If the appliqué material is a lightweight fabric, you may want to use a fusible web on the back to stabilize the fabric and for appliqué place- ment. Fuse appliqué in place with an iron.

Do not remove fabric from the frame to iron the appliqué material.

gPress the “Start/Stop” button.

Memo

Some patterns may not show all three appli- qué steps. Sometimes the “Appliqué” step will be shown as a color.

→The appliqué will then be completed.

hChange the upper thread and then carry out the rest of the embroidering.

Memo

•Some glue may get onto the presser foot, needle, and needle plate at this time. Finish embroidering the appliqué pattern and then clean away the glue.

•For best sewing results clip all threads between color steps.

5

Embroidery

149