Brother 882-S90/S91 manual Sewing Embroidery Patterns, 147

SEWING AN EMBROIDERY PATTERN

Sewing Embroidery Patterns

Example:

	a
b

aEmbroidery color order

bCursor

Memo

The [+] cursor moves over the pattern, show- ing which part of the pattern is being sewn.

aThread the machine with the first color (see “Threading Using the “Automatic Threading” Button” on page 25).

bPress the “Presser Foot Lifter” button to lower the presser foot, and press the “Start/ Stop” button to start embroidering.

→When the first color is completely sewn, the machine will automatically trim the threads and stop. The presser foot will then automatically be raised.

On the embroidery color order display, the next color will move to the top.

Memo

If there is thread left over from the beginning of sewing, it may be sewn over as you con- tinue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the threads at the beginning.

cRemove the thread for the first color from the machine. Thread the machine with the next color.

dRepeat the same steps for embroidering the remaining colors.

→When the last color is sewn, “Finish sewing” will appear on the display. Press (CLOSE), and the display will return to the original screen.

Memo

The Thread Trimming Function is originally set to trim excess thread jumps (threads linking parts of the pattern, etc.). When an end of upper thread may remain on the surface of the fabric at the beginning of the stitching, depending on the type of thread and fabric that are used. After embroidering is finished, cut off this excess thread.

*If the setting has been turned off, trim the excess thread jumps using scissors after the pattern is finished.

See page 155 for information on the thread trimming function.

5

Embroidery

147