Brother 882-S90/S91 Lower Threading, Winding the Bobbin, Using the Supplemental Spool Pin, A 3

LOWER THREADING

Winding the Bobbin

Press → → →

in that order to display a video example of

bobbin winding on the LCD (see page 18). Follow the steps explained below to complete the operation.

CAUTION

•The enclosed bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the enclosed bobbin or bobbins of the same type (part code: SA156, (XA5539-151)).

Actual size

11.5 mm (approx.

7/16 inch)

This model Other models

■Using the Supplemental Spool Pin

With this machine, you can wind the bobbin during sewing. While using the main spool pin to sew embroidery, you can conveniently wind the bobbin using the supplemental spool pin.

6 5 a 3, 4

2 9

7, 8

l o

1

aSupplemental spool pin

LOWER THREADING

aTurn the main power to ON.

bAlign the groove in the bobbin with the spring on the bobbin winder shaft, and set the bobbin on the shaft.

a

b

aGroove of the bobbin

bSpring on the shaft

cSetposition.the supplemental spool pin in the “up”

a

aSupplemental spool pin

dPlace the spool of thread on the supplemental spool pin, so that thread unrolls from the front. Then push the spool cap onto the spool pin as far as possible to secure the thread spool.

a

b c

aSpool pin

bSpool cap

cThread spool

1

Getting Ready

19