Brother 882-S90/S91 manual LCD Screen

LCD SCREEN

LCD SCREEN

When switching on the machine, the screen will display the name of the machine. Touch the screen to display the utility stitch. Either “1-01 Straight stitch (Left)” or “1-03 Straight stitch (Middle)” is selected, depending on the setting selected in the setting screen (See page 12).

Press a key with your finger to select the stitch pattern, to select a machine function, or to select an operation indicated on the key.

Note

When the straight stitch needle plate is on the machine, the needle will automatically move to the middle position.

Memo

•Only touch the screen with your finger or the included touch pen. Do not use a sharp pencil, screw- driver, or other hard or sharp object. It is not necessary to press hard on the screen. Pressing too hard or using a sharp object may damage the screen.

a b

c

e

d

f

1

Getting Ready

aShows single or twin needle mode setting, and the needle stop position.

Single needle/down position Single needle/up position

Twin needle/down position Twin needle/up position

bShows the presser foot code. Attach the presser foot indicated in this display before sewing.

cShows the name and code number of the selected stitch.

dShows a preview of the selected stitch.

eShows the stitch patterns.

fShows additional pages that can be displayed.

*All key functions of the LCD are explained in the “key functions” table on the following page.

9