Brother 882-S90/S91 manual Threading Manually

			UPPER THREADING
Note	aTurn the main power to ON.
When the “Automatic Threading” button is	bTurn the handwheel so that the line on the
pressed, the presser foot will be automatically
lowered.	machine is aligned with the line on the
	handwheel.
If you are using an incorrect needle and thread			1
combination, the hook may sometimes get
caught in the needle. If this happens, remove
the hook from the needle as described below.			Getting Ready
			a
	a Line on handwheel
	Memo
	If the line on the machine is not aligned with
	the line on the handwheel, the sewing
CAUTION	machine cannot be threaded. Check that the
	line on the handwheel is facing up as shown in
• The needle thread carrier will automatically	the illustration above.
thread the needle when the “Automatic
Threading” button is pressed. Be sure to keep	cPress	.
your hands and other items away from the
needle area, otherwise injuries may occur.	→ The key appears as		.
Threading Manually	dRaise the presser foot lever.

Automatic threading cannot be used when using the wing needle, the twin needle, or special thread with a thickness of 130/20 or thicker. In these cases, thread the needle as described below.

10
8		Pivot the spool pin so that it angles upward.
11
9		eSet the thread spool on the spool pin so that
		the thread unwinds from the front of the
7	5, 6
		spool.
		3
4, 12
13
14		a

15	2	b
		c
	1
		a Spool pin
		b Spool cap
		c Thread spool

27