Brother 882-S90/S91 manual Darning, Use darning stitches for mending and other applications

SEWING THE STITCHES

■Darning

Use darning stitches for mending and other applications.

		Presser		Stitch width		Stitch length		Twin
Stitch	Stitch name		Applications	[mm (inch.)]		[mm (inch.)]
		foot						needle
				Auto.	Manual	Auto.	Manual
	Darning		Darning of medium weight fabric	7.0	2.5 - 7.0	2.0	0.4 - 2.5
								NO
				(1/4)	(3/32 - 1/4)	(1/16)	(1/64 - 1/16)
	Darning		Darning of heavyweight fabric	7.0	2.5 - 7.0	2.0	0.4 - 2.5
								NO
				(1/4)	(3/32 - 1/4)	(1/16)	(1/64 - 1/16)

Darning is performed by sewing from the front of the presser foot to the back as shown below.

a

a

aReinforcement stitches

aSelect“A”. a stitch, and attach buttonhole foot

bSetdarning.the scale to the desired length of the

a

b

d

c

aPresser foot scale

bCompleted length measurement

cWidth 7 mm (approx. 1/4 inch)

d5 mm (approx. 3/16 inch)

Memo

The maximum length for darning is 28 mm (approx. 1-1/16 inches).

cCheck that the needle drops at the desired position and lower the presser foot, making sure the upper thread passes underneath the buttonhole foot.

Note

•Pass the thread underneath the presser foot.

•Set the presser foot so that there is no gap behind the section marked with an “A” (the shaded area in the illustration below). If there is a gap, the size of the darning will not be correct.

86