Brother 882-S90/S91 manual Needle and Presser Foot Section Embroidery Unit, Presser foot

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

Needle and Presser Foot Section

e

Embroidery Unit

f i

e

d

g

a

bh

d

c

aPresser foot holder

The presser foot is attached onto the presser foot holder.

bPresser foot

The presser foot applies pressure consistently on the fabric as sewing takes place. Attach the appropriate presser foot for the selected stitch.

cFeed dogs

The feed dogs feed the fabric in the sewing direction.

dBobbin cover

Open the bobbin cover to set the bobbin.

eNeedle clamp screw

Use the needle clamp screw to hold the needle in place.

fButtonhole lever

The buttonhole lever is used with the one-step buttonhole foot to create buttonholes.

gNeedle bar thread guides

Pass the upper thread through the two needle bar thread guides.

hNeedle plate

The needle plate is marked with guides to help sew straight seams.

iPresser foot holder screw

Use the presser foot holder screw to hold the presser foot in place.

f

c

b

a

aCarriage

The carriage moves the embroidery frame automatically when embroidering.

bRelease button (located under the embroidery unit)

Press the release button to remove the embroidery unit.

cFeed dog position switch

Use the feed dog position switch to raise and lower the feed dogs while the embroidery unit is attached.

dEmbroidery unit connection

Insert the embroidery unit connection into the connection port when attaching the embroidery unit.

eEmbroidery frame holder

Insert the embroidery frame into the embroidery frame holder to hold the frame in place.

fFrame-securing lever

Press the frame-securing lever down to secure the embroidery frame.

CAUTION

•After the embroidery frame is set in the frame holder, be sure the frame-securing lever is correctly lowered.

Note

•Be sure that the feed dog position switch on the embroidery unit is located at right when embroidering.

•You can also sew utility/decorative stitches with the embroidery unit attached. Set the feed dog position switch on the embroidery unit to the appropriate setting.

2