Brother 882-S90/S91 manual Quilting with Satin Stitches, Press

SEWING THE STITCHES

■Quilting with Satin Stitches

Use the foot controller to sew with satin stitches. If you set the speed control slide to control the stitch width, you can make subtle changes in the stitch width during sewing.

aAttach the foot controller (see page 39).

bSelect and attach presser foot “J”.

cPress in the length display to shorten the stitch length.

Memo

The setting will vary according to the kind of fabric and the thickness of the thread, but a length of 0.3 to 0.5 mm (approx. 1/64 to 1/32 inch) is best for satin stitches.

dPress to use the speed control slide to control the stitch width.

eSet the width control to “ON”.

Memo

You can use the speed control slide to adjust the stitch width. Use the foot controller to adjust the sewing speed.

fPress .

→The display will return to the original screen.

gStart sewing

*You can adjust the stitch width during sewing by moving the sewing speed controller. Slide the lever to the left, and the stitch width becomes narrower. Slide it to the right, the stitch width becomes wider. The size of the width changes equally on both sides of the middle needle position.

a b

anarrower

bwider

Rough sketch (line)

70