Samsung RZ80FHIS1/XEO, RZ80EEIS1/XEO manual Handles may not have cover depending on the models

12.Use wrench to separate the hinge shaft and then flip the hinge and reattach the hinge shaft.

13.Reassemble the hinge on the freezer door by reversing the step 11. Make sure to use right side hinge cover (which can be found underneath the removed plastic cover from step 2) and remove the grommet. After reassembling the hinge, wire and the hinge cover, switch the side from left to the right.

Grommet

14.After switching the hinge, make sure to take out the right side wire cover, and close it with the wire cover on the top of freezer door.

“Cover Wire Door R” can be found in the packaging

15.Take off the handle cover and remove the screws, make sure to detach the caps and the handle from the right to left side of the door. (Make sure to cover the right side with detached caps.)

Handles may not have cover depending on the models.

16.Switch the hinge cap and attach the front leg cover. Carefully put the freezer door back on.

Hinge cap

17.Tighten the 3 bolts and then connect the wires back together.

Make sure your freezer is unplugged before WARNING handling electrical wires.

18.Connect the wire on the plastic cover and put the cover back to its original position.

19.Tighten 2 screws back to its place.

20.Detach the Fridge and the Freezer door gaskets and then attach them after rotating them 180˚.

• After reversing the doors, make sure WARNING the Fridge and Freezer door gaskets are

properly arranged. If not, there might be a noise or dew formed which affects perfomance of the refrigerator.

01 SETTING UP

setting up _13