56
Setup and Reset
7
7 Setup and Reset
Configuring Backlight
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to ECO and press [ ] on the product.
4Press [ ] to move to Backlight and press [ ] on the product. The following screen will appear.
zOff : Turn off the screen and activate DPMS mode. If Off is selected, it takes several seconds
for the monitor to detect movement and turn on after it turned off.
zDimming: Reduce the brightness of the screen (still turned on).
5Press [ ] to move to the option you want and press the [ ].
6The selected option will be applied.
zThe optimal working area for Eco Motion Sensor is within a certain distance (1m) and atcertain
angle (40°).
zIf there is no user movement, the Eco Motion Sensor may fail to detect motion.
zIf you think that the mode entry message appears too frequently, increase the time setting of the
Eco Motion Sensor or turn the Eco Icon Display Off.
zAvoid using radio equipment such as a walkie-talkie near the product as this may cause a product
malfuction.
7.1.2 Eco Light Sensor
The Eco Saving feature optimizes the view condition and contributes to power saving by adjusting th e
screen brightness depending on the ambient light intensity.
zThis menu is not available when Bright is in Dynamic Contrast mode.
zThis menu is not available when Eco Saving is enabled.
Configuring the Eco Light Sensor
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to ECO and press [ ] on the product.
m
Return EnterMove
ECO
Eco Motion Sensor
Backlight
Eco Light Sensor
Sensitivity
Brightness Level
Eco Saving
Eco Icon Display
ଥࢿ
5 Min
Off
Off
Off
Dimming
m