ENGLISH
6262
Playback
Audio Dubbing (SC-D364/D366 only)✤The Audio Dubbing function works only in <Player> mode. ➥page 19
✤You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
✤You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.
✤Use the internal or an external microphone(not supplied) or other audio equipment.
✤The original sound will not be erased.
1. Set the [Power] switch to [PLAYER].
■If you want to use an external microphone, connect the microphone
to the external MIC input jack on the Camcorder.
2. Set the [Mode] switch to [TAPE].
3. Press the
[√√
/
■■
(PLAY/STILL)
]
button and find the time frame of the
scene to be dubbed.
4. Press the
[√√
/
■■
(PLAY/STILL)
]
button to pause the scene.
5. Press the [A.DUB] button on the remote control.
■Audio Dubbing icon ( ) is displayed.
■The Camcorder is ready for dubbing.
6. Press the
[√√
/
■■
(PLAY/STILL)
]
button to start dubbing.
■Press the
[■ (STOP)]
button to stop the dubbing.
[ Notes ]
■You can not use the Audio Dubbing function while playing a write protected video tape.
■To utilize an external MIC or sound source, connect a microphone to the MIC jack or use the Multi-AV Cable (or AV
JACK; SC-D263/D363 only) to connect external sound source input.
■To dub an external sound source, set the <AV In/Out> function to <AV In> (SC-D365/D366 only).
➥page 67
√
1