Samsung SC-D363, SC-D365 manual Viewing the Demonstration Demonstration

ENGLISH

Initial Setting : System Menu Setting

Viewing the Demonstration (Demonstration)

✤The Demonstration function may only be used in the <Camera> mode without a tape inserted in the Camcorder. ➥page 19

✤Before you begin: Make sure that there is no tape inserted in the Camcorder. ➥page 32

✤Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily.

✤The Demonstration operates repeatedly until the Demonstration mode is switched Off.

1. Set the [Power] switch to [CAMERA].

2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only) 4

3.Press the [MENU] button.

■ The menu list will appear.

4.Move the [Zoom] lever up or down to select <System>, then press the [OK] button.

1

	Camera Mode
√System
	Clock Set
	Remote	√On
	Beep Sound	√On
	Language	√English
	Demonstration	√On

ZOOM Move OK Select MENU Exit

5.Move the [Zoom] lever up or down to select <Demonstration>, then press the [OK] button.

6.Move the [Zoom] lever up or down to select <On>, then press the [OK] button.

7.Press the [MENU] button.

■ The Demonstration will begin.

8.To quit the Demonstration, press the [MENU] button.

[ Notes ]

■The Demonstration function is automatically activated when the Camcorder is left idle for more than 10 minutes after switching to the <Camera> mode (if no tape is inserted in the Camcorder).

■If you press other buttons (FADE, MF/AF, PHOTO, EASY.Q) during the Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.

6

7

Camera Mode

Back

Clock Set

Remote

Beep Sound

Language

Demonstration Off

On

ZOOM Move OK Select MENU Exit

SAMSUNG Camcorder is...

Demonstration

28