ENGLISH
3333
✤Before you begin: Make sure that there is no tape inserted in the Camcorder. (see page 38)
✤Demonstration automatically shows you the major functions that are included with your
Camcorder so that you may use them more easily.
✤The Demonstration function may only be used in the REC mode without a tape inserted in
the Camcorder.
✤The Demonstration operates repeatedly until the Demonstration mode switched Off.
1. Set the Power switch to REC.
2. Press the MENU button.
■
The menu list will appear.
3. Move the Joystick up or down to select System, then press the Joystick(OK).
4. Move the Joystick up or down to select Demonstration, then press the Joystick(OK).
5. Move the Joystick up or down to select On, then press the Joystick(OK).
6. Press the MENU button.
■
The Demonstration will begin.
7. To quit the Demonstration, press the MENUbutton.
[ Notes ]
■
The Demonstration mode is automatically activated when the Camcorder is left idle for more than
10 minutes after switching to the REC mode (no tape is inserted in the Camcorder).
■
If you press other buttons (FADE, BLC, PHOTO, EASY.Q) during the Demonstration mode,
the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other
functions.
The Camcorder : System Menu Setting
Viewing the Demonstration
Move Select Exit
MENUOK
REC Mode
√System
Clock Set
Remote
Beep Sound
Language
Demonstration Off
On
5
6
Samsung Camcorder is...
Demonstration
[Digital Camcorder]
REC Mode
√System
Clock Set
Remote
Beep Sound
Language
Demonstration
√On
√On
√English
√On
Move Select Exit
MENUOK
3
1