USB Connection speed depending on the System
ENGLISH

7878

USB Interface

✤The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)

✤You can easily transfer a image from a Memory card to a PC without additional add-on cards via a USB connection.

✤You can transfer a recorded file in memory card to a PC via a USB connection.

✤If you transfer data to a PC, you need to install the software (DV Driver, Video Codec , DirectX 9.0) supplied with the Camcorder.

High speed USB connection is supported by Microsoft (Windows) device drivers and Apple's Mac OS X.

■

Windows 98SE/ME - Full Speed USB

■

Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.

■

Windows XP- High speed USB on a system with Service Pack 1 or later installed.

■

Mac OS X - High speed USB on a system with 10.3. or later installed. (Only in CAMERAmode)

[ Notes ]
■
USB 2.0 works only for removable disk functions.
■
On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.
■
On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.
■
Intel®Pentium III™or Pentium 4™ is a trademark of the Intel Corporation.
■
Mac, Macintosh and Mac OS are trademarks of Apple Computer, Inc.
■
Windows®is a registered trademark of the Microsoft®Corporation.
■
All other brands and names are property of their respective owners.
■
Operations are not guaranteed for all of the recommended computer environments mentioned above.
■
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.
■
In CAMERAmode, be sure that the Memory card is inserted into Camcorder before connecting USB cable.
If no Memory card or an unformatted Memory card is inserted, PC will not recognize your Camcorder as a removable disk.
■
USB Streaming requires Video Codec, DV Driver and DirectX 9.0.
■
If you disconnect the USB cable from the PC or the Camcorder during the data transfer, the data transfer will stop and the data may be damaged.
■
If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly.
If this occurs, remove all other USB devices and try the connection again.
System RequirementsTransferring a Digital Image through a USB Connection
CPU Pentium III, 600MHz Pentium 4, 2GHz
OS Windows98SE/ME Windows 2000/XP
Memory 128MB 512MB
HDD Capacity 1GB or more 2GB or more
Resolution 1024 x 768 dots 1024 x 768 dots
24-bit Color 24-bit Color
USB USB1.1 USB2.0 High Speed
Windows Environment
Minimum Recommended
G3 500MHZ G4 Processor
Mac OS 10.2 Mac OS 10.3
128MB 512MB or above
200MB (For applications only.
2GB or above
Apart from this,
1GB or more free space)
800 x 600 dots 1024 x 768 dots
16-bit color 24-bit color
USB 1.1 USB 2.0 High Speed
Macintosh Environment
Minimum Recommended