ENGLISH
7171
Playback
The Camcorder : Playback
✤You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with the Multi-AV cable.
■
The yellow jack: Video
■
The white jack: Audio(L) - Mono
■
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Power switch to PLAY.
4. Turn on both the TV and VCR.
■
Set the input selector on the VCR to Line.
■
Select the channel reserved for your VCR on the TV set.
5. Play the tape.
✤You can play the recorded tape in PLAYmode.
1. Connect a power source and set the Power switch to PLAY.
2. Insert the tape you wish to play back.
3. Using the œœ/√√ (REW/FF) buttons, find the first position you wish to play back.
4. Press the √/» (PLAY/STILL) button.
■
The images you recorded will appear on the TV after a few seconds.
■
If a tape reaches its end while being played back, the tape will rewind automatically.
[ Notes ]
■
The playback mode (SP/LP) is determined by the mode in which the tape was recorded.
■
If the VCR has an S-Video input jack, you may use S-Video for better quality.
■
The S-Video jack transmits video only. Connect audio cables for sound.
■
If only a mono audio input is available on the TV set, use the audio cable with the white
jack(Audio L).
Connecting to a TV which has no Audio and Video Input Jacks
Antenna
S-Video input
Multi-AV Cable
TV
VCR Camcorder
Video input-Yellow
Audio input
(left)-White
Audio input
(right)-Red
1