ADDRESS SET
The address of the system keyboard can be set.
Press “ADDRESS SET” and the keyboard address input window will appear as shown below.
Enter the address by using the number keys and press the enter key. Press enter the “EXIT” ICON on lower left if you want to clear the window without entering the address.
•The ADDRESS of the keyboard can be set as 0 ~ 32.
•- ADDRESS “0” : STAND ALONE
-ADDRESS “1” : MASTER
-ADDRESS “2~32” : SLAVE
•If you use a keyboard, it should be set to “0”.
•If you use 2 or more keyboards, you should set one of them to “1” and oth- ers to other numbers between “2~32”. There can be errors in communica- tion if you set any of them to “0”.
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The default setup for the
-BAUD RATE : 4800
-DATA BIT : 8
-PARITY CHECK : NONE
-STOP BIT : 1
ADDRESS SET
Same as the address set of
BAUD RATE
The BAUD RATE of
Press “BAUD RATE” and a
BAUD RATE
The BAUD RATE of the
Among these 4 kinds of BAUD RATE, select one BAUD RATE.
DUPLEX
You can set the duplex mode of system keyboard.
Press “DUPLEX”, and then the following window pops up.
FULL DUPLEX / HALF DUPLEX
Select one of the two duplex. Press the exit icon on the lower left to finish
600 / 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600
Among these 8 kinds of BAUD RATE, select one BAUD RATE.
DATA BIT
The BAUD RATE of
Press “DATA BIT” and a
Choose one between 7 / 8.