《16》
PTZ Mode
(2) PRESET
■This menu is for setting the camera to move to preset locations.
(2-1) PRESET Setup
①At the [PTZ SETUP 1 ▶] menu, press the 1 button (see p.15).
②Use the joystick or camera control button (SCC-3000 model) to move
the camera to the desired location (move up, down, left, and right, and
control zoom).
③Enter a preset number.
④Press the Enter button to assign the number to the current location.
(2-2) PRESET Movement
①In the initial screen, enter an assigned preset number.
②The selected number will be shown in the [- - -] display.
③Press the Preset button to move the camera to the preset location.
▤If the number entered is not within the selectable range, the last
entered number is taken as the first number.
The selectable range for each camera model is as follows.
●SPD 1600/2200/2500 : 1 ~ 64
●PELCO-D : 1 ~ 80
Certain numbers have special functions other than preset.
33 + PRESET - FLIP COMMAND
97 + PRESET - RANDOM SCAN
98 + PRESET - FRAME SCAN
99 + PRESET - AUTO SCAN
See the camera manual for more information.
●PANASONIC (WV-CS854A) : 1 ~ 64
●Samsung (SCC-641/643) : 1 ~ 127
▤Preset setup is also available in the OSD menu of the connected
camera.
PTZSETUP1
PRESETNO:0
Enter:PresetIDSet
CAMID: 5SPD
PTZSETUP1
Enter:PresetIDSet
CAMID:5SPD
PRESETNO:1
Enter:PTZIDSet
PTZCONTROLSYSTEM
CAMID: 5SPD
MONITOR:1[1]