ZOOM SPEED
In the ZOOM SPEED menu you can select the speed of the ZOOM Key (Tele/Wide).
Use the [Left] or [Right] keys in the ZOOM SPEED menu to select
the speed.
1 : Magnification x 22 takes about 18 seconds. Slowest speed
2 : Magnification x 22 takes about 10 seconds. Low speed
3 : Magnification x 22 takes about 6 seconds. High speed
4 : Magnification x 22 takes about 4 seconds. Fastest speed
|
| (CAMERA SET) |
|
|
|
|
|
| |
|
| CAMERA ID | OFF |
|
|
| INT |
| |
|
| COLOR/BW | AUTO... |
|
|
| ZOOM SPEED | 3 |
|
|
| MOTION DET | OFF |
|
|
| EXIT | QUIT |
|
|
|
|
|
|
|
|
|
|
|
If you press [ENTER] once more, you will exit the "AREA" setting menu.Use the "SENSITIVITY" menu to set the sensitivity of the MOTION Detection.The Higher it is set, the more sensitive the Motion Detection moves.
➜
Use the [Left, Right, Up, Down] Keys Press the [5] key to assign an area
or to cancel the area.
MOTION DET
In MOTION DET, you can set the Motion Detection function, Motion Detection Sensitivity, and the Area of Motion Detection. If the Motion Detection function is set, the movement of an intruder can be detected. When motion is detected,
*Motion Detection function does not operate while handling slow SHUTTER, PRESET,
SCAN, AUTO MODE(AUTO PAN, PATTERN) or MANUAL KEY (JOYSTICK, ZOOM, FOCUS, IRIS).
it sets off the Alarm signal of the Controller.
| (CAMERA SET) |
|
| ➜ |
| (MOTION DET) |
|
| |
|
|
|
|
|
| ||||
| CAMERA ID | OFF |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
| INT |
| Press |
|
|
|
|
| |
| COLOR/BW | AUTO... |
|
|
|
|
|
| |
|
| [Enter] |
|
|
|
|
| ||
| ZOOM SPEED | 3 |
|
|
|
|
|
| |
| MOTION DET | ON... |
|
|
|
|
|
|
|
|
|
|
|
|
| AREA |
| PRESET... |
|
| EXIT | QUIT |
|
|
| SENSITIVITY | MEDIUM |
| |
|
|
|
| RET |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you select ON and press the [ENTER] key, the “MOTION DET” submenu screen will come up.
The “AREA” menu, from which you can specify screen areas where the Motion
EXIT
The EXIT menu is used to quit the CAMERA SET menu of the
-QUIT: Ignores the changed information and restores the saved information.
-SAVE: Saves the information of the setting condition of the menu.
-PRESET: Ignores the changed information and restores the initial factory defaults of the menu.
| (CAMERA SET) |
|
| |
|
|
| ||
| CAMERA ID | OFF |
| |
| INT |
| ||
| COLOR/BW | AUTO... |
| |
| ZOOM SPEED | 3 |
| |
| MOTION DET | OFF |
| |
|
|
| QUIT |
|
| EXIT |
| ||
|
|
|
|
|
|
|
|
|
|
Detection function will be applied, can be set to either PRESET or USER. If you set the “AREA” menu to PRESET, the Motion Detection function will be applied to the areas preset as factory defaults.
If you set the AREA menu to USER and press the [ENTER] key, you can choose from 48 areas where you want to apply the Motion Detection function.
Use the [5] key and [left, right, up, down] keys to move and select the motion detection area.
Press the [5] key to assign an area or to cancel the area.
2. VIDEO SET MENU
IRIS
The video output level of the monitor can be controlled by the IRIS lens depending on the level of the incoming light.The video output level can be set in the ALC menu.The opening and shutting of the Iris lens can be set manually in the MANU menu.