Samsung SCC-643 SCC-643AP, SCC-643P 4. AUTO MODE, AUTO PAN, START SET, END SET, DIRECTION, ENDLESS, SPEED, PATTERN

4. AUTO MODE

AUTO PAN and PATTERN functions are in AUTO MODE.

AUTO PAN

After selecting the locations of two points (PAN/TILT) of START and END, it loops continuously in the set up SPEED.

	* * MAIN MENU * *			(AUTO MODE)
		CAMERA...	➜	AUTO PAN ...
		VIDEO SET...		PATTERN SET		1...
		PRESET...	Press
		AUTO MODE...
			[Enter]
		ALARM SET...
		OTHER SET...		RET
			➜	AUTO PAN
				START SET		...
			Press	END SET		...
				DIRECTION RIGHT
			[Enter]
				ENDLESS		ON
				SPEED		STEP5
				DWELL TIME		2 S
				EXIT		QUIT
START SET
From "START SET...", get into the START
SET setup screen by pressing [ENTER].					SET START!
After selecting the locations of PAN/TILT
location, press [ENTER] again to return to
higher menu.
END SET
From "END SET...", get into the END SET					SET END!
setup screen by pressing [ENTER]. Adjust
PAN/TILT location and press [ENTER] to
return to a higher menu.

DIRECTION

This sets up the movement direction of the START to END location (PAN location standard)

"RIGHT " :"LEFT " :

ENDLESS

This is a 360-degree rotation function that stops for the DWELL TIME only in the START and END positions without running between the START and END positions. It can be set to "ON" or "OFF".

SPEED

This is a setting function for movement speed setup. It can be set from STEP1 to STEP64.

DWELL TIME

This is a function for setting up the time to stay in the START to END position.

PATTERN

This is a replay function so that the MANUAL functions such as PAN,

TILT, ZOOM, and FOCUS are played for 30 seconds.

* * MAIN MENU * *			(SCAN MODE)
	CAMERA...	➜	AUTO PAN		...
	VIDEO SET...		PATTERN SET		1.	..
	PRESET...	Press
	AUTO MODE...	[Enter]
	ALARM SET...
	OTHER SET...		RET
		➜		PATTERN1 SET
		Press
		[Enter]

3-18 3-19