3.Block type: The screen displays with small blocks. When a motion is detected in the selected blocks, the small blocks are displayed on the screen.
PRESET: The whole screen becomes the motion detection area.
USER...: You can manually set the motion detection area. Use the UP/DOWN/LEFT/RIGHT Setup switch to set the area. To erase the selected block, press the Setup switch.
In order to set the motion detection area on your own, you have to specify the size and location for the area setting.
When ON is selected in DISPLAY, the detected motion is displayed on the screen and the camera sends the Alarm Out signal.
You can also assign the sensitivity for motion detection.
❚DAY/NIGHT
The DAY/NIGHT menu is used to configure the day and night related settings for this camera. This camera can turn the IR (Infrared) filter on or off.
CAMERA ID | OFF |
IRIS | ALC... |
SHUTTER | OFF |
AGC | HIGH |
MOTION DET | OFF |
DAY/NIGHT | DAY... |
WHITE BAL | ATW2 |
PRIVACY | OFF |
SPECIAL | ... |
... | |
EXIT | QUIT |
26
