If you keep pressing the LEFT/RIGHT Setup switch, shutter speeds toggles in the following order:
OFF AUTO X2 AUTO X4 AUTO X6 AUTO X8 AUTO X12 AUTO X16 AUTO X24 AUTO X32 AUTO X48 AUTO X64 AUTO X96 AUTO X128 AUTO X256 OFF 1/100 (NTSC), 1/120 (PAL) 1/250 1/500 1/1000 1/2000
1/4000 1/10K
Note
When the IRIS mode is ELC or WDR, you cannot use high speed shutters.
❚AGC
The AGC (Auto Gain Control) menu is used to set the AGC level of the camera. When the AGC is active, the camera automatically increases the sensitivity by amplifying the Video signal when the strength of the signal falls below the normal value.
CAMERA ID | OFF | |
IRIS | ALC... | |
SHUTTER | OFF | |
AGC |
| LOW |
MOTION DET | OFF | |
DAY/NIGHT | DAY... | |
WHITE BAL | ATW2 | |
PRIVACY | OFF | |
SPECIAL | ... | |
... | ||
EXIT | QUIT | |
|
|
|
Only when OFF or a high speed shutter is selected in the SHUTTER menu, you can set the AGC level.
You can select any of OFF, LOW, and HIGH.
Note
When the DAY/NIGHT is set to AUTO, the AGC is displayed with
ENG
23