Samsung SCC-B2310, SCC-B2311P, SCC-B2011P manual SW3 FL

User’s guide

camera in the internal sync mode occurs a skip every time it moves to other scene. However, this can be solved by positioning the L/L switch to ON and using the level bar to

Eadjust the vertical sync phasing.

-If your camera uses DC 12V for power source, it operates in the internal mode regardless of the position (On/Off) of the L/L switch.

2)SW2(ELC) :

Use this for the manual iris lens. If set to ON, the electronic shutter speed varies between 1/60 and 1/120,000 second to keep the screen brightness proper. However, you must position this switch to OFF if you are using the auto iris lens (DC or Video control type). Because, in this mode, the camera can show the color rolling effect when operating under the mechanical fluorescent lightning. If this happens, apply the AC power and set the SW1 (L/L) to ON. (NTSC: 60Hz, PAL: 50Hz)

3)SW3 (FL) :

It is an anti-flicker system in 50Hz areas for NTSC and, in 60Hz areas for PAL that prevents the flickering of the image due to mismatch between the vertical sync frequency and the on-off frequency of the lightning. If set to ON, the electronic shutter speed stays at either 1/100sec (NTSC) or 1/120sec (PAL).

※Note : If SW2 (ELC) is set to ON, the anti-flicker system does not work even if SW3 is positioned to ON.

22