Samsung SCC-B5368P, SCC-B5368BP, SCC-B5366P, SCC-B5366BP manual How to use OSD Menu, Auto

How to use OSD Menu

If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON.

If BURST is set to ON, the Burst signal will output together with the black-and-white composite video signal. If BURST is set to OFF, the Burst signal does not output.

You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.

•AUTO

The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition.

If you press the SETUP switch with an AUTO- based sub menu selected, you will see the appropriate screen.

‹AUTO‹
BURST		OFF
DAYÆNIGHT
BRIGHTNESS		MID
DWELL TIME		2S
NIGHTÆDAY
BRIGHTNESS		MID
DWELL TIME		5S
MASK AREA		1 2
￿	￿	￿

for which you can select from LOW, MID, and HIGH. As you adjust it from HIGH to LOW, the screen switches to black and white mode under the darker situation.

DWELL TIME of DAYÆNIGHT sets the time to maintain switched black and white mode.

The BRIGHTNESS of NIGHTÆDAY sets the brightness degree of BW to color switching, for which you can select from LOW, MID, and HIGH. As you adjust it from HIGH to LOW, the screen switches to color mode under the darker situation.

DWELL TIME of NIGHTÆDAY sets the time to maintain switched color mode.

The MASK AREA menu is used to prevent unintended mode switching or inability of determining the switching due to existence of high spot light source at night.

If you press the SETUP switch in item 1 or 2 of the MASK AREA menu, you will see a menu where you can specify an area to MASK.

‹MASK AREA‹

<SIZE> ￿ <LOCATION>￿

ENG

You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.

The BRIGHTNESS of DAYÆNIGHT sets the	￿ ￿ ￿ ￿	￿
brightness degree of color to BW switching,

English – 21