How to use OSD Menu
- How to set the point
You can set each position of the 4 points.
①If you press the SETUP switch in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move.
②Use the switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning.
-How to set the position
You can move the position of the overall area.
①By pressing the SETUP switch in <POSITION>, you can move the overall position of the privacy zone.
②Use the switch to move the position and press the SETUP switch to confirm it.
Note :
–If more than one PRIVACY ZONE is specified and the PRIVACY SET is set to ON, the PIP function will be deactivated.
–If the 12th PRIVACY ZONE is specified, the LINE function of FENCE will be deactivated.
OTHER SET
OTHER SET |
|
|
|
FACTORY DEFAULTS | |
OSD COLOR | BW |
❖FACTORY DEFAULTS
All the settings will be restored to the factory default.
❖ OSD COLOR | [BW, R/G/B] |
You can set the OSD(On-screen Display) color to COLOR or B/W.
ENG
English – 29