Components of your camera

Your camera has the following components:

13

2 5 4

7

66

7 8

Lens

@ 9 0

!

#Video connectorPower connector

1.Dome cover: Covers the inner cover, lens, and main body to protect them.

2.Cover screw: Use it to assemble or disassemble both dome cover and case.

3.Inner cover: Covers the main body to protect it.

4.Wing locker: Push a long thin screwdriver into its narrow spot and press it outward when you want to remove the inner cover.

5.Main body: Includes a lens, a switch board, a PCB board, screws, and such.

6.Screws for assembly and disassembly: Using these 2 screws, the Main body is closely connected to the Case.

7.Hooker: By pulling the left/right levers in the arrow direction, the Main body can be detached from the Case.

8.Case: Used as a ceiling or wall fixture. It is fixed using four screws provided in the package.

9.Zoom lever: Using this lever, the lens zoom can be adjusted and fixed.

10.Focus lever: Using this lever, the lens focus can be adjusted and fixed.

11.Tilt fixing screw: Using this screw, the slope of the lens can be adjusted and fixed.

12.Switch board: Includes two kinds of control switches such as function switches and phase-control switches. The board has eight function switches in the middle and two phase-control buttons on each side of the function switch area.

13.Cable: Connect the Video connector to BNC cable and Power connector to power adapter.

8