Samsung SCC-B5399P, SCC-B5397P manual  Note, Location

How to use OSD Menu

•ALC (Automatic Light Control)

①If you press the SETUP switch with an ALC- based sub menu selected, you will see the appropriate screen.

	ALC
LEVEL	[00]----I----
BACKLIGHT		OFF
￿	￿	￿

The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it.

②If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area.

you can set the desired BLC zone by defining the size and location.

		ALC
LEVEL		[00]----I----
	BACKLIGHT		BLC
	AREA		USER
	<SIZE>￿

<LOCATION>￿

If you use an ordinary camera in a scene with an intensive backlight, the object will be displayed dark on the monitor affected by the backlight. To solve this problem, you can use the BLC(Back Light Compensation) function to improve the sharpness of the image in such a high contrast scene.

③If you set the BACKLIGHT option to WDR, you will see a menu where you can set the WDR options.

You can adjust the shutter speed in WDR LEVEL and the brightness in WEIGHT.

You can also select any of OUTDOOR, and INDOOR in WHITE BAL.

		ALC
LENS			DC
LEVEL		[ 00]----I----
	BACKLIGHT		WDR
	WEIGHT		MID
	WDR LEVEL	[ 0]----I----
	WHITE BAL		INDOOR
￿		￿	￿

WDR(Wide Dynamic Range) extends the gain range of the screen that is mostly useful if you take a simultaneous picture of both indoor and outside of the window.

Namely, it improves the sharpness of the picture in outdoor scenery as well as indoor.

ENG

			 Note :
￿	￿	￿	– If you use the VPS (Virtual Progressive Scan) function, the CCD
			reads differently so you can not use WDR simultaneously.
			If you set VPS to ON, WDR will be automatically set to OFF.

English – 17