Samsung SCC-B5399P, SCC-B5397P manual AGC Color SUP, Reverse, Posi/Nega, Pip

How to use OSD Menu

DIGITAL ZOOM  Note :

RATIO	[X1.0]
< LOCATION > ￿

–Use of DC 12V will fix V-SYNC to INT, which can not be changed.

❖ AGC COLOR SUP [LOW , MID, HIGH]

Adjust the color scheme according to the AGC value.

￿ ￿ ￿

-LOCATION : If you press the SETUP switch in the condition where the image is enlarged as much as the

ratio setting, you can watch an invisible area of the effective screen as well using the cdef switch.

❖ REVERSE [OFF, H, V, H/V]

Mirrors video signals horizontally, vertically, or both.

❖ POSI/NEGA [+, -]

Output as it is or mirror the video brightness signal.

❖ PIP [OFF, ON]

Displays a sub image together with the main image on the same screen using the Picture In Picture function.

Note :

–If the digital zoom factor is set to larger than 1x, the FENCE function will be deactivated.

The DIGITAL ZOOM function enlarges the pixel itself, which can cause deterioration of the quality.

❖DETAIL [0~3]

Controls the horizontal or vertical distinction.

❖ V-SYNC [INT, LINE]

Select the vertical sync mode for INT or LINE.

If you select INT, the camera will use the internal synchronization.

If selecting LINE, the camera will use the external power source frequency for the synchronization.

You can adjust the LL-PHASE.

Note :

–If more than one privacy zone is set and the PRIVACY SET is set to ON, the PIP function will be deactivated.

–If the INTELLIGENCE function is set to FENCE mode, the PIP menu will be deactivated.

❖ DIS [OFF, ON]

Digital Image Stabilization will set the anti-shake

compensation.

Note :

–If you set DIS to ON, the compensation area will be enlarged as set in the digital zoom factor.

If you set the digital zoom factor to greater than the enlarged zoom factor for the compensation, the DIS function will be deactivated.

English – 23