10_ installation & connection
* 2 : For short voltage supply during MENU OFF, executes ONEAF and for
more than 2 second
* 3 : For more than 2 second long voltage supply, moves to the PRESET
0(HOME) position.
7. 5V OUT
Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA.
8. DAY/NIGHT IN
This is a function to receive the external DAY/NIGHT signal from the
sensor(option) and convert the signal into BW.
9. RS-485 DATA-
Jack for connection to RS-485 DATA- signal line.
10. RS-485 DATA+
Jack for connection to RS-485 DATA+ signal line.
SETUP Switch
This switch is used to set the function or property. When this switch is pressed
for at least 2 seconds, the MAIN MENU appears.
ef
(Left/Right)
: By pressing this switch left or right, you can move left or right
on the menu or change the displayed value.
cd
(Up/Down) :
By pressing this switch up or down, you can move up or down on
the menu.
: When you press this switch in the menu, the selected function is confi rmed.
To enter a submenu, press this button.
Video OUT Port
This is connected to the Video Input Port of the monitor and it outputs the
Video signals.
GND
This is a grounding port.
Power Connection Port
This is connected to the Power cable.
Power Display LED
When the power is normally connected, the red LED lights.
SCC-C4239P-TRK-ENG.indd 10SCC-C4239P-TRK-ENG.indd 10 2009-10-9 9:31:462009-10-9 9:31:46