Samsung SCC-C4237P, SCC-C4239P, SCC-C4337P, SCC-C4339P - page 13

English _13
English
4. Determine the type of power supply and set the POWER SELECTION switch
accordingly. Next, plug the power adapter into a wall outlet.
5. If the camera operates normally, the following screen will be displayed for
5 seconds and then disappears.
6. The requirements for RS485 control is as follows :
- Signaling Speed: 9600 bps
- Data Bit : 8 bits
- Stop Bit : 1 bit
- Parity Bit : none
SYSTE M INFO
TYPE 4_34 ZOM_WDR_PTYPE 4_34 ZOM_WDR_P
PROTOCOL SAMSUNGPROTOCOL SAMSUNG
ADDRESS 0ADDRESS 0
COMM.TYPE RS485,HALFCOMM.TYPE RS485,HALF
BAUD RATE 9600BAUD RATE 9600
CAMERA VER. V1.00_090817CAMERA VER. V1.00_090817
LENS OKLENS OK
SCC-C4239P-TRK-ENG.indd 13SCC-C4239P-TRK-ENG.indd 13 2009-10-9 9:31:472009-10-9 9:31:47