Preparing the Cables
To install and use the
Power Adapter Cable
The cable that plugs into the
Check the rated voltage before using the cable.
Video Cable
The
Cable Connection
1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT)
2. Then, connect the other end of | E |
the connector to the Video Input | |
Terminal of the monitor. |
|
3. Now connect the Power Adapter Cable. Use a driver to screw one part of the two lines of Power Adapter to Power Input Terminal of the
4.Adjust the switch on the Power Adapter to the proper voltage. Then, connect the Power Adapter's plug to the Power Connector.
5.Connect the Remote Control Terminal of the
and the external Controller.
Controller
Adapter BOARD
