Installing SCC-C6403
Installation Precautions
1)Make sure that the installation site can sufficiently support a minimum of four times the net weight of the
2)Install in an area where the space above the ceiling board is over 18 cm (7 in.) high.
3)Use the supplied screws to fasten the camera to the bracket assembly.
4)Keep persons away from the installation area, as there is a risk of falling objects.
Also, move valuables to a safe location before installation.
Separately Sold Products for Installation
Depending on the installation site, it may be convenient to use one of the following products.
1) CEILING MOUNT BRACKET (SBR-100DCM)
This bracket is used for installing the SmartDome CAMERA in the plenum above the drop ceiling.
2)WALL MOUNT ADAPTOR (SADT-100WM)
This adaptor is used for installing the indoor housing or the outdoor housing for the SmartDome Camera on a wall.
3)INDOOR HOUSING (SHG-120)
This housing is used for installing the SmartDome Camera to an indoor wall or a ceiling.
4)OUTDOOR HOUSING (SHG-220)
This housing is used for installing the SmartDome Camera to an outdoor wall or a ceiling.
❈To install and use OUTDOOR HOUSING, remove the Clear Case from the Camera body before installation.
E
