POSITION SET
From "POSITION SET..." press [ENTER] to get into the PAN/TILT, FOCUS/ZOOM SET screen
to set the PAN/TILT location and FOCUS/ZOOM condition then press [ENTER] to return to a higher menu.
4. ZONE SET
The ZONE SET menu includes the setup of ZONE DIRECTION, and
ZONE AREA.
PRESET ID
This is the ID set up function for each PRESET.
It can be set up to 12 characters using the left, right, up, and down keys. The ID location can be set in the submenu of "LOCATION..."
VIDEO SET
This is the screen setting function for each PRESET.
Refer to the explanation under "VIDEO SET menu".
** MAIN MENU **
CAMERA SET...
VIDEO SET...
PRESET...
ZONE SET...
AUTO SET...
ALARM SET...
OTHER SET...
SYSTEM INFO...
➜
Press [Enter]
(ZONE SET) |
|
ZONE DIR SET | OFF |
ZONE AREA SET | OFF |
EXIT | QUIT |
E
PRESET SPEED
This function sets up the speed of PAN or TILT by 8 steps from 1(SLOW) to 8(FAST).
-PRESET SPEED 1 : Maximum PAN moving speed of 240°/sec
-PRESET SPEED 8 : Maximum PAN moving speed of 400°/sec
DWELL TIME
ZONE DIR SET
Press the [Enter] key in the “ZONE DIR SET ON…” mode to enter the SET NORTH screen. MAP. Move PAN to set the SET NORTH position and press [ENTER]. Based on the North position,the direction of N(North),
This is a function setting for the DWELL TIME of the PRESET location in "SCAN" motion. It can set DWELL TIME From 1 ~ 60 Sec.
IMAGE HOLD
Pauses the image when PRESET is in movement, If you set the IMAGE HOLD menu to ON, the screen will be paused until PRESET finishes
(ZONE SET) |
|
ZONE DIR SET | ON... |
ZONE AREA SET | OFF |
➜
Press [Enter]
SET NORTH
N
moving.
EXIT
"QUIT" : Does not save the selected information and returns to a higher menu.
"SAVE" : Do saves the selected information and returns to a higher menu.
"DEL" : Deletes the selected information and restores the DEFAULT. Then returns to a higher menu.
EXITQUIT
