Installation
1.Press the SNAP FIT of the ADAPTOR in the HOUSING to open the ADAPTOR part, and then insert all external cables into the HOUSING. Secure the HOUSING on the PIPE or MOUNT by turning it clockwise.
(Secure two components tightly, to avoid loosened HOUSING.)
PIPE OR | PIPE OR |
MOUNT | MOUNT |
HOUSING | HOUSING |
EXTERNAL
CABLE
ADAPTOR
2.Connect external cables to the CONNECTORS(ALARM IN, POWER,
Insert the cable into the FRAME SET, and close the ADAPTOR.
English
|
|
| HOUSING | BNC JACK |
|
|
| INSULATION | |
|
|
|
| |
POWER INPUT ALARM OUT | TUBE | |||
| ||||
ALARM IN | EXTERNAL |
| ||
|
|
| CABLE |
|
|
|
|
| ADAPTOR |
M | Then, wrap the BNC JACK with the INSULATION TUBE, and use an insulation tape | |||
| to seal up the end of the INSULATION TUBE so that the BNC JACK does not | |||
protrude outside of the INSULATION TUBE coating.
For more information about cable connection, refer to Connecting the adaptor cable. (page 19)