3.Tie up the SAFETY WIRE of the CAMERA on the BRACKET WIRE of the FRAME SET.
Arrange the 22P CONNECTOR of the CAMERA in line with that of the ADAPTOR, push the HOOKs on either end of the CAMERA in the RACK direction of the FRAME SET to secure the two.
Then, ensure that all of the two HOOKs clicks to fix to the RACK properly.
22P CONNECTOR | HOUSING | |
| ||
RACK | RACK | |
BRACKET WIRE | ||
| ||
FRAME SET |
| |
SAFETY WIRE |
| |
HOOK | PROTECTIVE | |
CAMERA | ||
TAPE | ||
| PROTECTIVE | |
| COVER | |
| HOOK |
M | When the installation is completed, remove the PROTECTIVE COVER and |
| PRETOECTIVE TAPE from the lens. |
4.Align each of the 3 SCREWS of COVER DOME and 3 SCREW HOLEs of the HOUSING respectively, and assemble the COVER DOME and HOUSING. During the assembling, note on the followings.
Insert and arrange SAFETY WIRE into the HOUSING while not disturbing the camera operation.
Ensure that the GASKET DOME component does not separate from the COVER DOME. (If the GASKET DOME is not properly assembled, it damages the waterproofness.)
English
| SAFETY WIRE |
HOUSING | HOUSING |
| |
CAMERA | SCREWS |
| COVER DOME |
GASKET DOME | COVER DOME |
|