Camera SET, Camera ID | Samsung SCC-C7453N instruction

setup

CAMERA SET

You can configure the general settings of the camera module.

For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 22)

1.Select <MAIN MENU> - <CAMERA SET>. The Camera Setup menu appears.

2.Change the settings as necessary, or select an item to check.

CAMERA SET 

CAMERA ID	OFF
IRIS	ALC
MOTION	(F.FAST) ---
DNR	MID
SHUTTER	(OFF) ---
SENS-UP	AUTO X4
FLICKERLESS	OFF
XDR	MID

CAMERA ID

Provide the ID and location for a camera that displays on the screen.

For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 22)

1.Select <CAMERA SET> - <CAMERA ID>.

2.Use the joystick to select a desired character, then press [ENTER].

In the lower input box of the screen, the selected character will be entered.

You can enter up to 54 characters including alphabets, numbers and special characters.

LOCATION : Specify the display position of the camera ID.

CAMERA ID

ABCDEFGHIJKLMNOPQRSTUVWXYZO 123456789 : ?_+()/

SP SP LOCATION

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

3.When done, press [ENTER].

The camera ID will be displayed in the specified position.

26_ setup

00956B-NA_SCC-C7453N-ENG.indb 26

2009-08-13 오후 10:58:

Image 26

Samsung SCC-C7453N user manual Camera SET, Camera ID, You can configure the general settings of the camera module

Contents

Smart Dome Camera Overview English Overview FCC Statement Important safety instructions Contents Features What’s Included Frame SET At a GlanceCamera Installation & connection Optional Accessories for Installation English Preparation PrecautionsHousing Cable Installation PIN Bush Power BNC Cable Bush 24V CableHousing Mount Bush Frame SET 22P Connector Housing RackHousing Camera Screws Cover Dome Gasket Dome Hook Protective Camera Tape Cover Communication Protocol Setup Initial SetupCamera Address Setup Samsung Half Samsung Full Use pins #5, #6 of SW603 to set the baud rate Baud Rate SetupSetting RS-422A/RS-485 Termination Factory default is 9600 BPS RS-422A/RS-485 Full Duplex Organization Same address in the network Monitor Alarm Alarm OUT Connecting with Other deviceConnecting to a monitor CONTROLLER/DVR Power Source To connect the controller To connect AlarmTo connect Alarm OUT Adaptor Board Connecting the adaptor cablePower Supply Camera will resume the last run operation How to use the keyboard controllerUsing OSD icons Main Menu Profile Burst DAY ModeNight EXT Burst Camera ID You can configure the general settings of the camera moduleCamera SET  Location Specify the display position of the camera ID Iris  Manual Adjust the iris level manuallyWith this, you can adjust the AGC level of a AGC Shutter MotionDNR SENS-UP XDR You can specify a recording mode according to the sceneFlickerless DAY/NIGHT SET-AUTO SET are not available Auto Switch or Auto FocusNeeded White BAL DAY/NIGHT Display P/T Zoom SpeedDisplay Zoom Digital Zoom Reverse SyncAGC Color SUP POSI/NEGA Intelligent Video You can enable the motion detection and tracking functionsWhen multiple motions continue arbitrarily Advanced Privacy Zone ResolutionAlarm OUT Display Preset Select the preset number Select Position and adjust PAN Auto SET Auto Pan SetupSettings so define them again after the operation You can set the Auto PAN, PATTERN, and Auto Play Position Direction Left Endless OFF Speed Select the Start and move the camera using pan/tilt/zoom Pattern SetupScan Setup Auto Play Setup ~ 511 for Preset Select Main MENU-ZONE SET Zone SETYou can set the north direction and the zone coverage Alarm SET Select Main MENU-ALARM SET  Auto SET Sets the pattern and scan Clock SET Other SET OSD Color Factory DefaultsPassword Proportional P/T You can check the system information CommunicationSystem Info Select Main MENU-SYSTEM Info Language You can set the language of the user interface Shortcut Keys Function Key INT/LINE Lock SpecificationsSmart Dome Camera PAN Tilt Product Appearance 00956B-NASCC-C7453N-ENG.indb 2009-08-13 오후