Samsung SCC-C7453P manual Flickerless

FLICKERLESS

This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting; if set to <ON>, the shutter speed will be fixed to 1/100 second.

If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS> menu is not available.

XDR

This will correct a brightness difference between different scenes for the optimal visibility by calculating the ambient luminance contrast in a certain unit of pixels. The higher the value is, the higher the correction level is.

DAY/NIGHT

You can specify a recording mode according to the scene.

For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 22)

1. Select <CAMERA SET> - <DAY/NIGHT>.
2. Select a screen transition mode according
	DAY/NIGHT				AUTO
to the illumination, and set options as	WHITE BAL
appropriate.	FOCUS MODE					ONEAF
y DAY : Fixed to DAY mode, regardless of	ZOOM SPEED			[2]
	DISPLAY ZOOM						OFF
the scene.	DISPLAY P/T						OFF
y NIGHT : Fixed to NIGHT mode,	DIGITAL ZOOM						OFF
regardless of the scene.	DETAIL			[2]
	V-SYNC						INT
If BURST is set to <ON>, the burst
signal will be output along with the
black-and-white composite video signal.
y AUTO : According to the luminance, this				AUTO
will switch DAY to NIGHT mode, or vice
versa.
	BURST						OFF
- BURST : If set to <OFF>, the burst	DAY	¨	NIGHT
signal will not be output in NIGHT mode.	BRIGHTNESS						MID
	DWELL TIME					2SEC
- DAY¨NIGHT BRIGHTNESS : Specify
	NIGHT¨DAY
the brightness level switching from	BRIGHTNESS						MID
COLOR to BW fi lter.	DWELL TIME					5SEC
	MASK AREA			1 2

Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.

-DAY¨NIGHT DWELL TIME : Time required to determine the fi lter switch.

-NIGHT¨DAY BRIGHTNESS : Specify the brightness level switching from BW to COLOR fi lter. Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.

English

English _29