Samsung SCC-C7453P manual ~ 8 inputs respectively, and the preset

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ALARM1

ALARM2

ALARM3

ALARM4

ALARM5

ALARM6

ALARM7

ALARM8

MOTION

AUTO SET

yALARM IN SET : Select the alarm sensor operation between <NO>, <NC> and <OFF>.

yALARM OUT SET : Set the alarm out port matched to the alarm input port.

yAUTO SET : Sets the pattern and scan

action for the corresponding alarm input. When the alarm is generated, the

camera moves to the preset position coupled to the corresponding alarm. Presets 1 ~ 8 are coupled with alarms

1 ~ 8 inputs respectively, and the preset

9 is coupled to the motion detection. The camera stops and remains in the corresponding preset position for the defi ned <DWELL TIME>, and performs

pattern or scan action defi ned by the <AUTO SET>. Setting to <OFF> will discard with the pattern or scan action after moving to the preset position.

-PATTERN 1 ~ 3 : Defi ned pattern action

-HALF1 : Patterns 1 and 2 in serial action

-HALF2 : Patterns 2 and 3 in serial action

-WHOLE : Patterns 1, 2 and 3 in serial action

-SCAN 1 ~ 4 : Predefi ned SCAN action

M The <ALARM1> is used as external switching signal if the <DAY/NIGHT> is set to <EXT>.

English

yAUX OUT CONTROL : Sets whether to sustain the alarm output despite of the alarm generation or to output alarm out signal while the coupled alarm is alive.

When selected <OFF>, outputs alarm only if the alarm is generated. When selected <ON>, it always outputs alarm out signal despite of the alarm generation.

	AUX OUT CONTROL
OUT1		OFF
OUT2		OFF
OUT3		OFF

English _45