Samsung SCC-C7455P setup, DAY/NIGHT, 28_ setup

setup

DAY/NIGHT

You can specify a recording mode according to the scene.

For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20)

1. Select <CAMERA SET> - <DAY/NIGHT>.
2. Select a screen transition mode according
	DAY/NIGHT				AUTO
to the illumination, and set options as	WHITE BAL
appropriate.	FOCUS MODE					ONEAF
￿ DAY : Fixed to DAY mode, regardless of	ZOOM SPEED			[2]
	DISPLAY ZOOM						OFF
the scene.
	DISPLAY P/T						OFF
￿ NIGHT : Fixed to NIGHT mode,	DIGITAL ZOOM						OFF
regardless of the scene.	DETAIL			[2]
	V-SYNC						INT
If BURST is set to <ON>, the burst
signal will be output along with the
black-and-white composite video signal.
￿ AUTO : According to the luminance, this				AUTO
will switch DAY to NIGHT mode, or vice
versa.
	BURST						OFF
- BURST : If set to <OFF>, the burst	DAY	￿	NIGHT
signal will not be output in NIGHT mode.	BRIGHTNESS						MID
	DWELL TIME					2SEC
- DAY￿NIGHT BRIGHTNESS : Specify
	NIGHT￿DAY
the brightness level switching from	BRIGHTNESS						MID
COLOR to BW fi lter.	DWELL TIME					5SEC
	MASK AREA			1 2

Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.

-DAY￿NIGHT DWELL TIME : Time required to determine the fi lter switch.

-NIGHT￿DAY BRIGHTNESS : Specify the brightness level switching from BW to COLOR fi lter. Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.

-NIGHT￿DAY DWELL TIME : Time required to determine the fi lter switch.

-MASK AREA : If there exists a bright spot light source in a night scene, you can specify the size and position as needed.

This will prevent an error in switching fi lter, or failure to determine the fi lter switch in a night scene where a bright spot light source exists.

Any excessively bright area in a night scene will be MASKed.

MASK AREA

<SIZE> <LOCATION>

28_ setup