Samsung SCC-C9302FP SCC-C9302FP, SCC-C9302P, SCC-C9302P/SAU, SCCC9302FP/SAU CAMERA MENU Organization

CAMERA MENU Organization

	ZOOM SPEED : Use [Left, Right] key in the ZOOM SPEED menu to set the speed
	as follows.
	ZOOM SPEED 1	: About 17Sec. from X 1 to X 12(Slowest)
E
	ZOOM SPEED 2	: About 10Sec. from X 1 to X 12(Slow)
	ZOOM SPEED 3	: About 6Sec. from X 1 to X 12(Fast)
	ZOOM SPEED 4	: About 3Sec. from X 1 to X 12(Fastest)

D-ZOOM : Sets up the Digital Zoom magnification ratio up to x10.

RS-485 : Sets up RS-485 Communication Protocol, Address, and Baud Rate.

(OTHER SET)			(SYSTEM INFO)
LANGUAGE	ENGLISH		ROM VER	0.207
ZOOM SPEED	1		EEP VER	0.208
DIGITAL ZOOM	OFF		PROTOCOL	SAMSUNG
RS-485	...	PRESS THE	ADDRESS	0
SYSTEM INFO	...		TYPE	RS-485, HALF	E
		ENTER
V-SYNC	INT		BAUD RATE	9600
DISPLAY ZOOM	ON	BUTTON.	SERIAL NO	000000000000000
RET
			RET

V-SYNC : INT shall be selected to use internal synchronization. LINE... is used to synchronize several camera phases for the multi camera operation by using an external signal(AC signal). As there may be a slight deviation between sets, adjusts PHASE to overcome this handicap. When you use AC power source, V-SYNC is available. Select LINE... and press [ENTER] and the

(OTHER SET)
LANGUAGE	ENGLISH
ZOOM SPEED	1
DIGITAL ZOOM	OFF
RS-485	...	PRESS THE
SYSTEM INFO	...
		ENTER
V-SYNC	INT
DISPLAY ZOOM	ON	BUTTON.
RET

(RS-485)
PROTOCOL	SAMSUNG
BAUD RATE	9600
ADDRESS	0

RET

PHASE control submenu will appear. The PHASE control ranges from -106H to +106H as for NTSC and from -138H to +138H as for PAL.

(OTHER SET)				(LINE LOCK)
LANGUAGE		ENGLISH
ZOOM SPEED		1
DIGITAL ZOOM		OFF
RS-485		...	PRESS THE
SYSTEM INFO		...
V-SYNC		LINE...	ENTER
DISPLAY	ZOOM	ON	BUTTON.	PHASE	(-308)I--------

SYSTEM INFO :You can confirm settings related to the RS-485 communication,

product serial number, and the software version.

RET RET

❖When a DC power is supplied, V-SYNC menu will be displayed as --- and you cannot make any settings.

46 47