ENGLISH
102102
The Camera : Basic Picture Taking
✤After taking a picture, your camera automatically shows just taken still image shortly and then
returns to recording mode after few seconds. You can set the Q.View duration using this menu.
✤The Q.View function works only for still images.
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Press the MENU button.
The top menu including (SET) is displayed.
3. Press the LEFT or RIGHT button to select (SET), then press the DOWN button.
The submenu including Q.VIEW is displayed.
4. Press the DOWN button to select Q.VIEW , then press the RIGHT button.
5. Select an option by pressing the UP or DOWN button
You can set to 1, 2, 3, 4, 5 seconds or set to OFF.
6. Press the OK or MENU button to apply your selection and exit the menu screen.
✤Quick Review is used to view the lastly recorded still image.
1. Turn your camera on by setting the Power Switch to (CAMERA) mode and turn the Mode Dial
to select (PROGRAM) mode.
2. Record a still image using the PHOTO button.
3. Press the LEFT button to view the picture just taken.
To see detailed information on the picture, press the DISPLAY button once.
4. To return to Camera mode, press the LEFT button again or press the PHOTO button halfway
down.
Viewing a Still Image using the Quick Review
Setting the Q.View Duration
IMPRINT
WL.REMOTE
BEEP SOUND
SHUTTER SOUND
Q.VIEW
MOVE: CHANGE:
OFF
ON
ON
ON
1 SEC
IMPRINT
WL.REMOTE
BEEP SOUND
SHUTTER SOUND
Q.VIEW
BACK: SET: OK
1 SEC