ENGLISH
9696
Advanced Techniques
✤ The FLASH works in CAMERA mode only.
✤ When power is supplied, FLASH mode is set to Auto. When you change FLASH modes, an icon that shows the current
FLASH mode will be displayed on the LCD screen.
✤ Using a flash enables the user to take bright pictures in dark circumstances, such as
nighttime shooting and in shaded areas.
Notes
■
By setting the Power Switch to CAMERAMode after placing the CAMERA side of the
Lens Body Block to the forward position, the FLASH will automatically open according to
the lighting conditions.
■
To close the FLASH, push the FLASH cover until it clicks.
■
The Flash does not function in CONTINUOUS SHOTmode or CAMCORDER Mode.
■
The battery power will be consumed faster with repeated use of the flash.
■
To use the flash again, wait until the flash is recharged (5 to 7 seconds).
Using the FLASH
00655B SCD5000 (070~109) 6/11/03 2:21 PM Page 96